Peter Day

Yamaha FZR750R OW01  & YZF750 specialist


Post Reply
Forum Home > General OW-01 Discussion > YZF750R Valve Clearance questions

Posts: 1

Hello all.  I'm in the US with a stock 94' YZF750R.  I bought the bike this past August, put about 1400 miles on it before winter garage time.  The bike is at 26,017 miles and the previous owner had no idea if the valve clearances had been done so I'm in the middle of doing them now.  I'm a bit surprised by the measurements I'm getting and wanted some more experienced input.  Take a look at the image of the chart I posted and see the current tolerances.  Any thoughts?    I had never seen clearances this tight before.    Everything (cams, lobes, etc..)  looks to be in great shape otherwise.  Thanks!  < short link to image of the chart with my current measurements


Hacking is learning.

January 18, 2018 at 11:03 AM Flag Quote & Reply

You must login to post.